Hello_there@fedia.io to Dullsters · 2 days agoFucking soda stream fucking tip gets stuck in fucking dispenser and fucking screws don't helpfedia.ioimagemessage-square22fedilinkarrow-up134arrow-down13
arrow-up131arrow-down1imageFucking soda stream fucking tip gets stuck in fucking dispenser and fucking screws don't helpfedia.ioHello_there@fedia.io to Dullsters · 2 days agomessage-square22fedilink
minus-squareHello_there@fedia.ioOPlinkfedilinkarrow-up1·2 days agoIts hard to tell via pics but that brass thing is pretty big. Like, bigger than a standard screw. Needle might work but hard to get leverage on anything that deep into it - tho that might be inexperience.
minus-squareAssistant ManagerMAlinkfedilinkEnglisharrow-up1·edit-22 days agoEven if you can get on it with some right angle long needlenose you risk tearing up the brass. work
minus-squareremotelove@lemmy.calinkfedilinkarrow-up1·19 hours agoThen there is heat. Using an oxy acetylene torch to heat up the whole assembly in an attempt to loosen the threads might work. What could go wrong?
Its hard to tell via pics but that brass thing is pretty big. Like, bigger than a standard screw. Needle might work but hard to get leverage on anything that deep into it - tho that might be inexperience.
Even if you can get on it with some right angle long needlenose you risk tearing up the brass.
Then there is heat. Using an oxy acetylene torch to heat up the whole assembly in an attempt to loosen the threads might work. What could go wrong?